5-Panel vs 10-Panel vs 12-Panel Drug Test: What Each Tests For and Which to Choose

Gloved hand beside three empty specimen cups and a clipboard on a desk

Share This Post

5-panel vs 10-panel drug test: the short answer

A 5-panel drug test screens for five drug classes: marijuana (THC), cocaine, amphetamines, opiates and PCP. A 10-panel test keeps those five and adds roughly five more, usually benzodiazepines, barbiturates, methadone and two others that depend on the lab or cup. A 12-panel test goes further, often adding oxycodone, MDMA or buprenorphine. Pick the smallest panel that covers the real risks in your workforce, and use the DOT panel whenever federal rules require it.

  • A “panel” is one drug or drug class the test screens for. More panels means wider coverage, not a more accurate test.
  • The exact drugs on a 10-panel or 12-panel test vary by laboratory and test cup, so always confirm the menu before you order.
  • Fentanyl is generally not part of standard 5-, 10- or 12-panel tests. It is usually an add-on.
  • DOT-regulated employees must be tested on the DOT panel under 49 CFR Part 40, not a custom 10-panel.
  • In Columbia, SC, published prices start at $65 for a 5-panel laboratory urine test and $89 for a 10-panel laboratory urine test.

If you hire or manage people in Columbia, SC or anywhere in the Midlands, “5-panel or 10-panel?” is one of the first questions you hit when you set up a drug testing program. The answer affects cost, what you can detect, and how defensible your policy is. This guide explains what each panel tests for, where the panels differ from lab to lab, and how employers usually choose.

What does “panel” mean in a drug test?

A panel is a single drug or drug class that the test screens for. A 5-panel test checks five; a 10-panel test checks ten. Some panels cover one substance (PCP), while others cover a whole family (amphetamines can include amphetamine and methamphetamine, and opiates can include codeine and morphine).

The panel count says nothing about the specimen. You can run a 5-panel on urine, oral fluid or hair. It also says nothing about accuracy. Accuracy comes from the collection process, the screening method, the cutoff levels the lab uses, and whether a non-negative screen is confirmed by a laboratory method such as GC-MS.

Screening panels vs confirmation

Most tests screen first. If the screen is negative, you are done. If a screen is non-negative, a laboratory confirms the specific drug and amount. For regulated testing, a Medical Review Officer (MRO) then reviews the result and talks to the donor about any legitimate prescriptions before reporting a final result to the employer.

What does a 5-panel drug test test for?

The standard non-DOT 5-panel is the most common workplace test in the country, and it covers the drugs most often found in workplace testing:

  • Marijuana (THC metabolite).
  • Cocaine (benzoylecgonine metabolite).
  • Amphetamines, typically including methamphetamine.
  • Opiates, typically codeine and morphine, which also catch most heroin use.
  • Phencyclidine (PCP).

You can read more about how we run this test on our 5-panel drug testing service page.

How the DOT 5-panel is different

The federal DOT test is also called a “5-panel,” but its contents are set by regulation, not by a lab catalog. Under 49 CFR Part 40, the DOT panel covers marijuana, cocaine, amphetamines, opioids and PCP. Since January 1, 2018, the opioid group has included the semi-synthetic opioids hydrocodone, hydromorphone, oxycodone and oxymorphone, in addition to codeine, morphine and the heroin marker 6-acetylmorphine. The DOT amphetamines group also includes MDMA and MDA.

In other words, a DOT 5-panel can catch prescription opioid misuse that a basic non-DOT 5-panel might miss. DOT revises its rules from time to time, so check the current ODAPC guidance and see our DOT drug testing page for how regulated collections work.

What does a 10-panel drug test test for?

A 10-panel keeps the five core classes and adds about five more. The most common additions are:

  • Benzodiazepines (for example, alprazolam and diazepam).
  • Barbiturates.
  • Methadone.
  • Propoxyphene or oxycodone. Propoxyphene was pulled from the US market in 2010, so many labs now use that slot for oxycodone or another opioid instead.
  • Methaqualone, an older sedative that some panels still include and others swap out.

Here is the catch most guides skip: there is no single national definition of a “10-panel.” Two labs, or two brands of rapid cup, can both say “10-panel” and still test for different drugs. Before you write a panel into your policy, get the exact drug list and cutoff levels in writing. See our 10-panel drug testing service page for the panel we run.

What is a 12-panel drug test?

A 12-panel test builds on a 10-panel with two more drugs. The most common additions are oxycodone (if it is not already in the 10-panel), MDMA (ecstasy) and buprenorphine. Some 12-panels add tricyclic antidepressants or other substances instead. As with the 10-panel, the composition depends on the lab or device.

Expanded panels beyond 12 (14-, 16- or custom panels) can add drugs such as tramadol, fentanyl, ketamine or synthetic cannabinoids. These make the most sense when you have a specific reason to look for them. 12-panel and expanded panels are available through Odosek Mobile DNA & Drug Testing; ask for a quote.

Gloved hand holding a multi-panel drug test cup with test strips inside
Panel tests differ in which drugs they cover, not in how carefully the specimen is collected.

5-panel vs 10-panel vs 12-panel: side-by-side comparison

The table below shows what each panel typically covers. “Varies” means some labs include the drug and others do not. Treat this as a general guide, not a lab menu.

Drug or drug class Non-DOT 5-panel DOT 5-panel Typical 10-panel Typical 12-panel
Marijuana (THC) Yes Yes Yes Yes
Cocaine Yes Yes Yes Yes
Amphetamines / methamphetamine Yes Yes Yes Yes
Opiates (codeine, morphine, heroin marker) Yes Yes Yes Yes
PCP Yes Yes Yes Yes
Oxycodone / oxymorphone Usually not Yes Varies Usually
Hydrocodone / hydromorphone Usually not Yes Varies Varies
MDMA (ecstasy) Usually not Yes Varies Usually
Benzodiazepines No No Yes Yes
Barbiturates No No Yes Yes
Methadone No No Yes Yes
Propoxyphene No No Varies Varies
Methaqualone No No Varies Varies
Buprenorphine No No Rarely Varies
Fentanyl No (add-on) Check current ODAPC rule No (add-on) Usually add-on

Does a 10-panel drug test test for fentanyl?

Usually not. Fentanyl is a synthetic opioid, and standard opiate screens are designed to detect morphine and codeine. Fentanyl has a different chemical structure, so it generally needs its own dedicated test. Most standard 5-, 10- and 12-panel tests do not include it unless you order it.

For example, our Oral Fluid 10-Panel ($99 per test) does not include fentanyl. If fentanyl is a concern in your workplace, ask for it as an add-on or as part of an expanded panel. Federal agencies have been working to add fentanyl to federal workplace testing, so DOT-regulated employers should check the current ODAPC notices instead of assuming either way.

How much does each drug test panel cost?

Price depends on two things: the panel and the specimen. Hair costs the most because the lab work is more involved. These are our published starting prices per test in Columbia, SC:

Published starting price per test by panel and specimen Starting price per test, by panel and specimen (USD) $0 $50 $100 $150 $200 5-panel lab urine $65 5-panel rapid urine $65 10-panel lab urine $89 10-panel rapid urine $95 Oral fluid 9-panel $80 Oral fluid 10-panel $99 Hair 5-panel $150 Hair 10-panel $225 Urine Oral fluid Hair
Published starting prices per test from the Odosek drug test pricing calculator. Mobile trip fees, confirmation and add-ons are extra. 12-panel and expanded panels are quoted on request.

On a urine test, moving from a 5-panel to a 10-panel lab test adds $24 per test at our published prices. For many employers, that is a small cost for much wider coverage. Mobile trip fees apply when a collector comes to you; for example, $75 during standard weekday hours (Monday to Friday, 8am to 5pm). Build a full estimate with our drug test pricing calculator.

Which drug test panel should an employer choose?

There is no single right panel. The best choice matches your legal obligations, your risk, and what you can defend in a written policy. Work through these steps in order:

  1. Check whether federal rules apply.If an employee holds a DOT safety-sensitive role (CDL drivers, for example), that test must follow 49 CFR Part 40 and the DOT panel. You cannot swap in a 10-panel for the federal test.
  2. Look at access to medications.Healthcare, pharmacy, home care and senior living staff may have access to controlled drugs. An expanded panel covering oxycodone, benzodiazepines and possibly fentanyl often fits better here.
  3. Weigh the safety risk.Jobs with heavy equipment, forklifts, power tools or vehicles have a higher cost of impairment. Many of these employers in the Midlands use a 10-panel for non-DOT roles.
  4. For general workforce hiring, start lean.Office, retail and hospitality employers often use a 5-panel for pre-employment testing, then use a 10-panel for reasonable suspicion or post-accident testing.
  5. Write it down and stay consistent.Name the exact panel and specimen in your policy and apply it the same way to everyone in the same role. For state-law questions, check with your employment attorney.
DOT compliance

DOT drug tests are lab-based. They use the Federal Custody and Control Form, a split specimen, a SAMHSA-certified laboratory and MRO review. Rapid screens are never used for DOT results. Any extra testing you want for a DOT employee, such as a 10-panel, must be a separate non-DOT test under your own company authority, with its own paperwork. Talk to your employment attorney before setting that up.

If you are building a program from scratch, our employer drug testing services page covers pre-employment, random, post-accident and reasonable suspicion testing for businesses across Columbia, Lexington, Irmo and the rest of the Midlands.

Warehouse manager and a worker in a high-visibility vest reviewing documents
Matching the panel to each role's risk is a policy decision HR and safety teams make together.

How does the specimen type affect which panel you choose?

The panel decides which drugs you look for. The specimen decides how far back you can see. Detection windows vary with the drug, the dose, how often someone uses it, and the person’s metabolism, so treat these as general ranges only:

  • Urine usually detects use from the past few days, and longer for frequent marijuana users. It is the standard for DOT testing and the most common workplace specimen. See urine drug testing.
  • Oral fluid (saliva) generally detects more recent use, often within the past day or two. Collection is directly observed, which makes tampering harder. See saliva and oral fluid drug testing.
  • Hair can show a pattern of use going back about 90 days, but it does not detect very recent use well. See hair follicle drug testing.

Not every panel is offered on every specimen. Our oral fluid tests come in 9- and 10-panel versions, and hair comes in 5- and 10-panel versions. For a deeper look at the tradeoffs, read our guide to drug testing methods: urine, hair and saliva.

Is a rapid 10-panel cup as reliable as a lab test?

A rapid cup is a screening tool. It gives preliminary results in as little as 5 minutes, which helps when you need a quick hiring decision. But a preliminary result is not a final result. At Odosek, a non-negative rapid screen goes to a SAMHSA-certified laboratory for confirmation, and lab-confirmed, MRO-verified results typically take 24 to 72 hours.

A lab-based test sends the specimen straight to the laboratory, where it is screened and, if needed, confirmed by GC-MS or a similar method. If a result could cost someone a job, many employers prefer to rely only on confirmed results. GC-MS confirmation of a non-negative screen is $50 per specimen at our published prices.

Do most employers use a 5-panel drug test?

The 5-panel is still the most familiar workplace test, partly because its core five drugs match the original federal panel. Plenty of employers have moved to a 10-panel, though, because prescription drug misuse is a bigger concern than it was when 5-panels became the default. In practice, employers in Columbia, SC tend to pick a 5-panel for low-risk roles where cost matters, and a 10-panel or expanded panel for safety-sensitive or medication-access roles.

Whatever you choose, apply it consistently. A test that changes depending on who is being tested is hard to defend. Odosek Mobile DNA & Drug Testing has served Midlands employers for more than 17 years and can help you match the panel to each role. Start with our drug testing in Columbia, SC overview.

More in this series: What a DOT drug test includes | Pre-employment drug screening for SC employers | How rapid drug screens work

Odosek Mobile DNA & Drug Testing — Columbia, SC

Mobile and onsite drug testing across Columbia and the SC Midlands, 24 hours a day, 7 days a week. Same-day collection is available throughout the Midlands.

Call 24/7

(803) 766-0036

Office

1034 Wildwood Centre Dr, Suite B
Columbia, SC 29229

Service area

Columbia, Lexington, Irmo, Cayce, West Columbia, Blythewood, Chapin, Forest Acres, Elgin, Camden, Sumter, Orangeburg

Frequently asked questions

What is the difference between a 5-panel and a 10-panel drug test?

A 5-panel screens for marijuana, cocaine, amphetamines, opiates and PCP. A 10-panel screens for those five plus about five more, usually benzodiazepines, barbiturates, methadone and two others that vary by lab, such as propoxyphene, oxycodone or methaqualone.

What does a 12-panel drug test test for?

A 12-panel usually covers everything on a 10-panel plus two more drugs, most often oxycodone, MDMA or buprenorphine. The exact list depends on the laboratory or test cup, so confirm it before you order.

Does a 10-panel drug test detect fentanyl?

Usually not. Fentanyl generally needs its own dedicated test because standard opiate screens are designed for morphine and codeine. Odosek’s Oral Fluid 10-Panel, for example, does not include fentanyl. Ask for fentanyl as an add-on or expanded panel.

Is the DOT 5-panel the same as a regular 5-panel?

No. The DOT panel is set by 49 CFR Part 40. Since 2018 its opioid group has included hydrocodone, hydromorphone, oxycodone and oxymorphone, and its amphetamines group includes MDMA and MDA. A basic non-DOT 5-panel usually does not include those.

How much does a 10-panel drug test cost in Columbia, SC?

Odosek’s published prices start at $89 per test for a 10-panel laboratory urine test, $95 for a 10-panel rapid urine test, $99 for an Oral Fluid 10-Panel and $225 for a Hair 10-Panel. Mobile trip fees and add-ons are extra.

Can a DOT employer use a 10-panel test instead of the DOT panel?

No. A DOT-required test must follow 49 CFR Part 40 and use the DOT panel. Any additional non-DOT testing must be done separately under the employer’s own authority. Check with your employment attorney before adding one.

How fast are drug test panel results?

Rapid screens give preliminary results in as little as 5 minutes. A non-negative screen goes to a SAMHSA-certified laboratory for confirmation, and lab-confirmed, MRO-verified results typically take 24 to 72 hours.

Need help choosing a drug test panel?

Tell us your industry and roles, and we will recommend a panel and specimen that fit. Trained, qualified collectors come to your office, plant or job site anywhere in the Midlands, 24/7.

Request drug testingCall (803) 766-0036

Picture of Kimberly Odom

Kimberly Odom

Kimberly Odom writes about DNA and drug testing for Odosek Lab Solutions, covering legal and non-legal paternity, prenatal testing, chain-of-custody, and mobile sample collection across South Carolina. Her articles help families and individuals understand their testing options and what to expect.
Professional Testing at Your Location

  • AABB-Accredited Labs Results
  • 99.99%+ Accurate Results In Just 4 Days
  • Private Collection At Your Locations

More To Explore

Odosek Lab Solutions only uses facilities accredited by AABB to conduct legal chain of custody testing, with scientific experts that ensure genetic testing results you can trust.

Accreditations held by our partner laboratories